General

Help with Magnus

Can I kill normal Magnus with a 560k range, about 180%boss and 83%pdr? Just asking cause I don't wanna do pre quests if I can't kill him.

December 3, 2014

9 Comments • Newest first

Vibracaust

You can kill him easily.

Reply December 3, 2014
LordofSky

Use a calculator, take a screenshot of your attack damage against him, and estimate how much damage vs time you do.

Reply December 3, 2014
Kazzooey

[quote=cheesemochi]Around 250K/100%/70% is kinda minimum. You have more than what you need[/quote]

That's it exactly. That's if you can somehow go ninja mode and survive the final 25% with such a low range, which is a nightmare. Recommended is a 500k range... well.... pretty much your range stats.

Reply December 3, 2014
cheesemochi

Around 250K/100%/70% is kinda minimum. You have more than what you need

Reply December 3, 2014
TheAznBob

I only ever fought normal Magnus with my Mercedes (200k range, 100% crit with 140% max crit damage I think, around 70% pdr, around 120% boss damage , Not counting Unicorn, Spikes, and Lightning debuffs) and I died 20 times while barely dropping him past half of his HP. It wasn't that long ago and my stuff is still the same cause I'm a poor scrub and all. I think you'll do fine if you are good at dodging all his moves. I hated the sliding slash move the most though, the easy mode version doesn't blast you all over the place ._.

Reply December 3, 2014
thundresso2

[quote=Charly]Just try it and see, you have nothing to lose. You won't lose exp or anything else for that matter.[/quote]

But time is money

Reply December 3, 2014
Charly

Just try it and see, you have nothing to lose. You won't lose exp or anything else for that matter.

Reply December 3, 2014
SpokenTaco

Well you did <3

Reply December 3, 2014
KamikazeDes

Yes you can, but keep in mind that the mechanics of Magnus are inherently ridiculous and will cause you to rip hair out, especially if you're a class without bind.
On a side note, putting wacky options in your poll means no one'll pay attention to what you're saying.

Reply December 3, 2014